Jin Fengsheng below small make up to tell you what the Copper Terminals line tension standard is, I hope to help you oh.
The tension data between the Copper Tube Terminals and the wire can be asked to your supplier, the supplier provides the most reliable and persuasive. Or you can use MOLEX,JST,AMP standards.
In fact, our company can make: each type of Cold-pressed Terminal to sample 30, or more, of course, the more the better, of course, to meet the high standard of Copper Terminals pressure, can be tested. After completion, tensile force is tested by tensile machine, and the best state is analyzed by X-Bar management diagram. After obtaining the tensile force, the average value is measured. There will be tolerances, of course. It depends on what your customers want.
PIN Copper Lugs
1,
Cable Lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.
3, Working temperature -55oC-150oC
4, Surface: Tin-plated
5, Insulated material: PVC, nylon
| PART NO | ITEM NO | DIMENSIONS | WIRE RANGE |
| F | L | L(PVC) | Single mm | Twine mm 2 | AWG | COLOR |
| LY0027-1001 | PIN1.25 | 2.0 | 22.5 | 10.0 | 0.57-1.44 | 0.25-1.65 | 22-16 | RED |
| LY0027-1002 | PIN2 | 2.0 | 22.9 | 10.0 | 1.44-1.82 | 1.04-2.63 | 16-14 | BLUD |
| LY0027-1003 | PIN5.5 | 2.7 | 27.3 | 14.0 | 1.82-2.98 | 2.63-6.64 | 12-10 | YELLOW |
Inquiry Basket ( 0 )
Contact Now
Contact Now
