When inserting the stripped core into the cord end Non-insulated Tubular Lugs Terminals cover, insert all the cores into the terminal. The detection method is estimation.
Cord end terminal Cord end crimping The conductor terminal to the conductor must be crimped with a special network cable pliers. The detection methods in this section are all estimation.
The cross section of the conductor must conform to the specifications and models of cord end Terminals.
The shaft rod of the special crimping tool should be consistent with the cross section of the wire, and the network cable pliers must be within a relatively limited time limit.
The crimping part is in the middle of the cord end terminal cover. The crimping part is properly specified.
When using v-shaped rod crimping pliers, it should be imprinted on the bottom of the cord end terminal cover. The crimping part is properly specified.
When using the special tool of endless bit equipment, the rocker of the special tool must be pressed to the bottom to achieve the physical properties specified in Note 3. Specify rocker thorough pressure exactly.
PART NO | ITEM NO | WIRE RANGE | DIMENSIONS | |||||||
AWG/MCM | mm 2 | ΦE | ΦD | Φd | W | B | L | COLOR | ||
LY0020-0001 | NL1.25-3 | 22-16 | 0.25-1.65 | 3.7 | 4.0 | 1.7 | 5.5 | 10.4 | 17.3 | RED |
LY0020-0002 | NL1.25-3A | 3.2 | 4.0 | 1.7 | 5.5 | 10.4 | 17.3 | |||
LY0020-0003 | NL1.25-3M | 3.7 | 4.0 | 1.7 | 6.6 | 10.4 | 20.3 | |||
LY0020-0004 | NL1.25-4 | 4.3 | 4.0 | 1.7 | 8.0 | 10.4 | 21.8 | |||
LY0020-0005 | NL1.25-4M | 4.3 | 4.0 | 1.7 | 6.6 | 10.4 | 20.3 | |||
LY0020-0006 | NL1.25-5 | 5.3 | 4.0 | 1.7 | 8.0 | 10.4 | 21.8 | |||
LY0020-0007 | NL1.25-6 | 6.4 | 4.0 | 1.7 | 11.6 | 10.4 | 27.5 | |||
LY0020-0008 | NL1.25-8 | 8.4 | 4.0 | 1.7 | 11.6 | 10.4 | 27.5 | |||
LY0020-0009 | NL1.25-10 | 10.5 | 4.0 | 1.7 | 13.6 | 10.4 | 31.8 | |||
LY0020-0010 | NL2-3 | 16-14 | 1.04-2.63 | 3.7 | 4.6 | 2.3 | 8.5 | 10.4 | 22.3 | BLUE |
LY0020-0011 | NL2-3A | 3.2 | 4.6 | 2.3 | 8.5 | 10.4 | 22.3 | |||
LY0020-0012 | NL2-3M | 3.7 | 4.6 | 2.3 | 6.6 | 10.4 | 19.8 | |||
LY0020-0013 | NL2-4 | 4.3 | 4.6 | 2.3 | 8.5 | 10.4 | 22.3 | |||
LY0020-0014 | NL2-4M | 4.3 | 4.6 | 2.3 | 6.6 | 10.4 | 19.8 | |||
LY0020-0015 | NL2-5 | 5.3 | 4.6 | 2.3 | 9.5 | 10.4 | 22.3 | |||
LY0020-0016 | NL2-6 | 6.4 | 4.6 | 2.3 | 12.0 | 10.4 | 27.3 | |||
LY0020-0017 | NL2-8 | 8.4 | 4.6 | 2.3 | 12.0 | 10.4 | 27.3 | |||
LY0020-0018 | NL2-10 | 10.5 | 4.6 | 2.3 | 13.6 | 10.4 | 30.8 | |||
LY0020-0019 | NL3.5-4 | 12-10 | 2.63-4.60 | 4.3 | 5.6 | 3.2 | 9.5 | 13.3 | 26.3 | YELLOW |
LY0020-0020 | NL3.5-5 | 5.3 | 5.6 | 3.2 | 9.5 | 13.3 | 26.3 | |||
LY0020-0021 | NL3.5-6 | 6.4 | 5.6 | 3.2 | 12.0 | 13.3 | 27.7 | |||
LY0020-0022 | NL3.5-8 | 8.4 | 5.6 | 3.2 | 12.0 | 13.3 | 27.7 | |||
LY0020-0023 | NL5.5-3 | 12-10 | 4.60-6.64 | 3.7 | 6.6 | 3.5 | 9.5 | 13.5 | 26.5 | YELLOW |
LY0020-0024 | NL5.5-4 | 4.3 | 6.6 | 3.5 | 9.5 | 13.5 | 26.5 | |||
LY0020-0025 | NL5.5-5 | 5.3 | 6.6 | 3.5 | 9.5 | 13.5 | 26.5 | |||
LY0020-0026 | NL5.5-6 | 6.4 | 6.6 | 3.5 | 12.0 | 13.5 | 32.5 | |||
LY0020-0027 | NL5.5-6S | 6.4 | 6.6 | 3.5 | 12.0 | 13.5 | 29.2 | |||
LY0020-0028 | NL5.5-8 | 8.4 | 6.6 | 3.5 | 15.0 | 13.5 | 34.5 | |||
LY0020-0029 | NL5.5-10 | 10.5 | 6.6 | 3.5 | 15.0 | 13.5 | 34.5 | |||
LY0020-0030 | NL8-3 | 8 | 6.64-10.52 | 3.7 | 8.3 | 4.5 | 10.0 | 17.5 | 30.0 | RED |
LY0020-0031 | NL8-4 | 4.3 | 8.3 | 4.5 | 10.0 | 17.5 | 30.0 | |||
LY0020-0032 | NL8-5 | 5.3 | 8.3 | 4.5 | 10.0 | 17.5 | 30.0 | |||
LY0020-0033 | NL8-6 | 6.4 | 8.3 | 4.5 | 11.0 | 17.5 | 31.5 | |||
LY0020-0034 | NL8-8 | 8.4 | 8.3 | 4.5 | 14.0 | 17.5 | 36.0 | |||
LY0020-0035 | NL8-10 | 10.5 | 8.3 | 4.5 | 18.0 | 17.5 | 39.5 |
Product Categories : Connecting Terminals > Plug-in Connecting Terminals
Longyi Nl Insulated Terminals
Insulated Ring Cord End Copper Cable Terminal Lug
Lt02506 Insulated Cord End Terminals
Nylon Insulated Pin Copper Electrical Terminal
Insulated Spade Terminals Black
Wholesale custom terminal blocks
Longyi Terminal Nylon Terminal
Copper Cable Terminal Lugs and Terminals